Glass Foaming Hand Soap Dispenser: Care and Refill Tips

Quick answer

Keep your glass foaming hand soap dispenser working well by cleaning it before each refill and using the right soap-to-water ratio. Avoid clogs and residue with these simple steps.

How to clean and refill your glass foaming hand soap dispenser

1. Empty and rinse the bottle: Pour out any remaining soap. Rinse the glass bottle with warm water until no suds remain. Common mistake: leaving old soap residue can cause the new batch to separate or clog the pump. Always empty completely before refilling.
2. Clean the pump mechanism: Remove the pump and rinse it under warm running water. Pump clean water through it a few times to clear the internal tube. Common mistake: skipping this step lets dried soap block the nozzle, making the pump stiff or unusable. Pump water through until it runs clear.
3. Mix soap and water for foaming: Fill the bottle with about 1 part liquid soap to 4 parts water. Gently swirl to combine—do not shake, or you'll create foam too early. Common mistake: using too much soap makes the foam watery and can clog the pump. Stick to a 1:4 ratio for best foam consistency.
4. Reattach the pump and test: Screw the pump back on tightly. Prime it by pumping a few times until foam appears. Common mistake: overtightening can crack the glass neck; snug is enough. Pump slowly at first to avoid splashing.

Product facts

• Glass Foaming Hand Soap Dispenser: Holds 12oz and is designed to be refilled again and again with your favorite scent. You can reuse the same bottle many times, reducing waste and saving money on single-use plastic dispensers.